Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Sharon
Chimney repair in Sharon, MA typically runs $350-$1,800 depending on what’s wrong, and most repairs can be diagnosed and quoted during a single visit. We’ve worked Sharon’s chimneys for decades, and we know the two things every Sharon homeowner should watch for: mid-century flues that were never meant for wood heat, and moisture damage from Lake Massapoag air. If your chimney is leaking, crumbling, or drafting poorly, call Wendell at Top Hat Chimney: (508) 687-5884.
Why Top Hat Chimney Is Sharon’s Preferred Chimney Repair Company
Wendell Pike founded Top Hat in 1999, and he has been elbow-deep in Sharon chimney repair ever since. Not from a call center. Not from a franchise van that rotates crews through four counties. Wendell and his crew know Sharon’s streets, its housing stock, and the particular ways its chimneys fail. When you call, a live person answers. It might be Wendell himself.
Sharon homeowners tend to hear the same story: they called a national outfit, got a phone quote, then watched the number climb once the technician was on the roof. We do not work that way. The price we quote before a single tool comes off the truck is the price on the invoice. Every job is backed by our 90-Day Done Right Promise, in writing: if it’s not done right, one call brings Wendell back at no additional cost. That promise is stamped on every Sharon job, from a simple flashing patch to a full rebuild.
We also answer the phone around the clock. A cracked flue on a Saturday night in February is not a Tuesday-morning problem. Call (508) 687-5884 and a real person picks up.
Our Chimney Repair Services in Sharon
Our Chimney Repair team handles the repairs Sharon’s older homes actually need, not the ones a national sales script pushes. Here are the four we do most often in Sharon.
Mortar Repointing
Sharon’s January-to-April freeze-thaw cycling splits mortar joints a little more every winter. Once water gets in, the cycle accelerates. We repoint with mortar matched to your chimney’s original composition and color, so the work holds and the chimney still looks right on a colonial off Bay Road or a cape near Massapoag Avenue. A typical repointing job in Sharon runs $40-$70 per square foot.
Spalling Brick Repair
Brick faces pop off and fall when moisture inside the brick expands and contracts. In the lakeside neighborhoods around Lake Massapoag, ambient humidity keeps bricks damper year-round, which is why we see more spalling there than in drier towns to the west. We cut out and replace damaged brick before a failing face turns into a structural problem. Spalling repair in Sharon typically runs $500-$1,800 depending on how many bricks have failed and how high on the stack they sit.
Chimney Waterproofing
This is the repair Sharon homeowners put off the longest and need the most. Humidity from Lake Massapoag plus 40-50 inches of annual snow means water is always working against your masonry. We apply vapor-permeable waterproofing that keeps rain and snowmelt out while letting the brick breathe. A typical chimney waterproofing in Sharon runs $350-$650 and is the single best dollar you can spend against future repointing and rebuilds.
Flashing Repair
Flashing is where the chimney meets the roof, and it is the first place Sharon’s ice dams and freeze-thaw cycles break through. We pull the old flashing, check the underlayment, and install new step and counter-flashing sealed against Sharon’s worst nor’easter weather. Flashing repair in Sharon usually runs $350-$900, and we always photograph what we find before we touch anything.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sharon
We install and service liners from DuraFlex, waterproofing and repair products from HeatShield, and caps and termination systems from Olympia Chimney and Famco. When a Sharon homeowner needs a liner, a crown, or a raincap, we’re not ordering blind from a catalog. We carry common parts for the chimney models in Sharon’s housing stock, which means less time waiting on a part and less time with an open flue. If your existing system uses another brand, we can service it too, and we’ll tell you honestly whether it is worth repairing or better replaced. The camera footage and a plain-English verdict, every time, no exceptions.
Common Chimney Repair Problems We See in Sharon Homes
- Oil-to-wood flue conversions gone wrong. During the 1970s energy crisis, a lot of Sharon homeowners capped their oil burner and ran a wood stove through the same flue. Oil flues were never built for solid-fuel temperatures. The result, 40-50 years on, is hidden liner cracks and third-degree creosote glaze no brush can fix.
- Eroded mortar in lakeside neighborhoods. Near Lake Massapoag, elevated humidity keeps mortar damp and soft. Joints that should last 30 years fail in 15. We see brick faces popping off stacks where the mortar has simply turned to sand.
- Raccoon and chimney swift nesting near Borderland State Park. Uncapped flues on wooded lots along the park border attract animals. A nest blocks draft, and the debris it leaves behind can ignite the first time you light a fire in the fall. We cap more chimneys in this corner of Sharon than anywhere else we work.
- Shared-stack cross-contamination in attached homes. In Sharon’s denser mid-century neighborhoods, some attached or closely built homes share a chimney stack. A neighbor’s wood stove can vent into an unused flue on your side, loading it with creosote nobody ever thinks to inspect.
Pricing for Chimney Repair in Sharon, MA
Here is what you can expect to pay in Sharon, based on the work we actually do here:
- Mortar repointing: $40-$70 per square foot
- Flashing repair: $350-$900
- Chimney waterproofing: $350-$650
- Spalling brick replacement: $500-$1,800
- Full or partial chimney rebuilding: $1,800-$7,500 depending on height and access
What moves the number is access. A chimney on a steep pitch off South Main Street or a three-story colonial in Sharon Heights costs more to scaffold and stage safely than a single-story cape with an easy run from the driveway. We give you the number before we start, in writing. We do not pad, and we do not find “surprises” halfway through. Standing offer: $40 off any repair over $200, and 10% off always for seniors and veterans. Call (508) 687-5884 for a free estimate.
We Also Serve Cities Near Sharon
If you are just across the line in Stoughton, Canton, Walpole, or Norwood, the same crew and the same Sharon service standard come to your door. We work these towns every week, and Wendell still answers the phone.
Serving Sharon, MA - Our Local Coverage Area
We’re based in the Sharon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Repair in Sharon
The original flues were drafted for oil burners, which run cooler and produce different exhaust than wood. When homeowners converted to wood stoves during the energy crisis decades ago, the flues took temperatures they were never built to handle. That thermal stress caused liner cracks that went uncaught for years. First-degree creosote is a brush job. Third-degree is a glaze. Catch it early. Call (508) 687-5884 and we’ll run a camera down the flue and show you the footage ourselves.
The lake raises relative humidity in surrounding neighborhoods year-round. Moisture sits in mortar joints longer, and when winter freezes arrive, that trapped moisture expands and breaks the mortar. The result is accelerated spalling, brick faces popping, and joints eroding years earlier than they would in Stoughton or Canton. We recommend waterproofing on almost every lakeside chimney we inspect.
Yes, and it happens in Sharon’s attached and tightly built mid-century homes more than anyone likes to think. If the flue on your side is unused and uncapped, a neighbor’s appliance can push exhaust into your stack and deposit creosote there. Nobody inspects a flue they don’t use, so the buildup sits until it becomes a fire risk. If you share a stack, get both sides inspected. Call us and we’ll tell you what we see, with the camera footage in hand.
Don’t light a fire, and don’t try to smoke them out. Raccoons and chimney swifts are common in the wooded lots along the Borderland State Park side of Sharon. The safe move is to have the flue inspected and a proper cap installed before the nesting season or after the animals leave on their own. We’ll tell you what we find and cap the flue so you don’t get a second tenant.
Repointing is enough when the mortar is the only thing failing. A rebuild becomes necessary when the bricks themselves are spalled, the crown is gone, and the stack is leaning or separating from the house. On some Sharon capes, the top courses are so weathered from lake humidity and freeze-thaw that tearing down from the roofline up is cheaper and safer than chasing bad brick forever. We’ll show you the photos, and we’ll tell you plainly if repointing will hold. If it will, we’ll say so. Your flue doesn’t care how the fire looks. It cares how it breathes.
If your chimney needs repair in Sharon, start with a phone call. (508) 687-5884. A live person answers. Estimates are free, the price you hear is the price you pay, and Wendell puts his name on the work. Ask anyone on your street.
Written by Wendell Pike, Owner at Top Hat Chimney, serving Sharon since 1999.