Chimney Cap & Crown in Sharon - Measured and Fitted, One Price

Fast, Reliable Chimney Cap & Crown Across Sharon

Chimney cap and crown work in Sharon, MA typically runs $350-$900 for a standard cap installation and $500-$1,400 for a crown repair or recoat, depending on flue count and masonry condition. Most jobs we handle in Sharon are done in a single visit, because we stock the parts our Sharon customers actually need and the sweep who shows up is the one who measured the job. That’s Wendell Pike’s company since 1999, and the number to call is (508) 687-5884.

Call (508) 687-5884

We know Sharon’s chimneys because we’ve been inside them for over 29 years. Cap and crown work here isn’t a box-checking exercise. It’s the difference between a chimney that sheds water and one that quietly rots from the top down. If you’re on a wooded lot off Massapoag Avenue or in a 1960s cape cod near the Center, your chimney has specific failure patterns that a national outfit’s phone rep simply won’t know to look for.

Why Top Hat Chimney Is Sharon’s Preferred Chimney Cap & Crown Company

Ask anyone on your street. Wendell answers his own phone more often than not, and when he doesn’t, a live person still does, around the clock. That matters in Sharon because this town runs on word of mouth. The homeowner near Borderland State Park whose raccoon problem we fixed last fall told two neighbors on Bayberry Drive. One of them called us a month later about a cracked crown they’d been ignoring since 2022. That’s how business works here, and frankly it’s how it should work everywhere.

Sharon homeowners tell us the same story: a national chain quoted one price on the phone, sent a stranger in a rented van, and the invoice came back higher than the estimate. We don’t operate that way. The price Wendell quotes before a single tool comes off the truck is the price on the invoice. Every job carries the 90-Day Done Right Promise in writing, stamped on the paperwork. If it’s not right, one call brings the crew back. No fine print, no runaround.

We serve Sharon directly. Scheduling is coordinated from our Boston office, but the crews working on your roof are familiar with Sharon streets, Sharon building eras, and Sharon’s particular chimney vulnerabilities. We’re not rotating a franchise through town; we’re the same faces year after year.

Our Chimney Cap & Crown Services in Sharon

Every Chimney Cap & Crown job starts the same way: camera inspection, plain-English verdict, and a written quote before any work begins. Here’s what we do most often for Sharon homeowners.

Cap Installation

A standard stainless cap on a single-flue Sharon chimney runs $350-$550 including the cap, mounting hardware, and labor. If your flue has been uncapped for years, this is the single best dollar you’ll spend on your fireplace. Uncapped flues in Sharon’s wooded neighborhoods draw raccoons and chimney swifts like a vacant rental draws college kids. The cap pays for itself the first winter you don’t hear scratching at 3 a.m.

Cap Replacement

Replacement runs $400-$650 for most Sharon homes, more if the old cap was poorly fitted and the flue tile needs dressing. We see a lot of caps installed during the 1990s that have rusted through at the seams, especially near Lake Massapoag where ambient moisture accelerates corrosion. A rusted cap isn’t just ugly; it sheds metal fragments into the flue and stops doing its job of keeping water out.

Crown Repair

Crown work in Sharon runs $500-$900 for standard repairs and $900-$1,400 when the crown needs to be rebuilt and waterproofed. Freeze-thaw cycling from January through April is brutal on Sharon crowns. Hairline cracks open, water gets in, and by March the crown is spalling. We patch with Gelco waterproofing products because they hold up to Norfolk County winters better than the off-the-shelf mixes most homeowners try first.

Crown Coating

A proper crown coating runs $400-$750 in Sharon, including prep and two coats. This is the service we recommend most often for homeowners who aren’t ready for a full rebuild but have a crown showing early cracking. Think of it as stopping the bleeding before you need stitches. For cape cods built in the 1960s and 1970s, crown coating is usually the right first move if the underlying concrete is still sound.

Multi-Flue Cap

Older Sharon homes near the Center often have multi-flue brick chimneys that need custom work. A multi-flue cap runs $700-$1,200 depending on flue configuration and whether we’re fabricating a custom unit. Standard sizes don’t always fit chimneys built in the 1800s, and forcing one on creates gaps that let water and animals through anyway.

Custom Cap

Custom caps run $750-$1,400. We spec them when the flue is an odd size, when you need a spark arrestor sized for a specific clearance, or when the existing crown has an unusual footprint. Wendell measures, orders from Famco or Copperfield, and installs to fit. No wobble, no caulk-and-pray.

Trusted Brands We Service in Sharon

We stock parts from Gelco, Olympia Chimney, and Famco for Sharon jobs, which means most cap and crown repairs don’t wait on a parts shipment. Gelco waterproofing is our default for crown sealing and recoating because it has held up better than anything else we’ve tested against Sharon’s freeze-thaw cycles and lake humidity. When a custom or oversized cap is called for, we order from Famco with Sharon flue dimensions taken on-site, not guessed from a satellite photo. For multi-flue and odd-configuration jobs, Olympia Chimney hardware gives us the mounting flexibility older Sharon homes need. The point is simple: you shouldn’t have to wait two weeks for a part when your crown is seeping water into your attic.

Common Chimney Cap & Crown Problems We See in Sharon Homes

• Oil-era flue adaptations gone wrong. Sharon’s 1950s-1980s capes and garrisons were built with single-flue masonry chimneys sized for oil burners. When wood stoves were added during the 1970s energy crisis, the flues rarely got upgraded caps or crowns to handle the new draft and moisture load. We find cracks and gaps in these systems routinely.
• Lakeside moisture intrusion. Neighborhoods around Lake Massapoag have elevated ambient humidity year-round. Crowns and caps near the lake spall and corrode faster than identical homes in Stoughton or Canton. What looks like a minor hairline crack in August is a money pit by March.
• Wildlife pressure from Borderland State Park. The dense tree canopy along the Sharon border creates a wildlife corridor that pushes raccoons and chimney swifts into uncapped flues at rates we don’t see in more open neighboring towns. A cap isn’t optional out there.
• Shared and adjacent flue contamination. Sharon’s dense postwar neighborhoods often have chimneys on attached or closely spaced homes. When a neighbor’s flue is uncapped, animals, debris, and even nesting material can work into your stack. One cap failure two doors down becomes your crown repair.

Pricing for Chimney Cap & Crown in Sharon, MA

We Also Serve Cities Near Sharon

Top Hat Chimney serves Chimney Cap & Crown in Sharon and the surrounding communities, including Stoughton, Canton, Walpole, and Norwood. Same crews, same pricing, same 90-Day Done Right Promise. If you’re just over the town line, call (508) 687-5884 and we’ll get you scheduled with someone who knows your neighborhood’s building stock.

FAQs - Chimney Cap & Crown in Sharon